| Description of hull and super structure standards: |
- Solid fiberglass hull
- UV resistant, high gloss ISO gel coat
- Coloured waterline
- Hydrodynamic, tapered stern post
- Wheelhouse built with fir plywood to customer spec
- All plywood glassed inside and out with gel coat finish
- 4 x 4 wheelhouse beams stained and varnished
- PVC grab rails
- Stainless steel bow cleat, stern and bow staples
- 4- 4" bronze scuppers in recessed pockets
- All sliding and folding doors on Teflon tracks
- Drain plug in keel
- Heavy duty PVC rub rail
- 11 PVC windows
- Lettering on boat
|
| Deck Hatches |
- Deck hatches are aluminum set in Stainless Steel frames, common size 24 x 24 with any size available
|
| Shafting |
Straight shaft assembly complete with:
- Straight shaft assembly complete with
- 9' X 316 Stainless Steel shaft comes with brass nut
- Stainless Steel shaft log with cutless bearing &inside box
- 4 bolt heavy duty steady bearing
- Shaft coupling
- Anodes
- Installation
- Propellor 24”-26”
|
| Steering |
Single station hydraulic steering complete with:
- 1250 Capilano helm pump - 3.4 cubic inch displacement
- BA 150 - 7 TMB cylinder with ball joint end
- Hydraulic hoses, fittings
- 1 ½" Stainless Steel rudder stock and 1/4" rudder plate
- Installation
|
| Fuel Tanks |
2 Stainless Steel fuel tanks constructed with 11 gauge 2B finish plate
- 2 S Steel fuel tanks constructed with 11 gauge 2B finish plate
- 1 ½"fill lines and 1 ½ " Stainless Steel deck fills
- 3/4" vent lines
- ½ " suction hose (hydraulic hose) from one tank
- shut off valve
- inter connecting line (3/4" hydraulic hose )
- ½" return line to one tank
- installation
- 100 gal
|
| Wash Down/ Bailing Pump |
- Jabsco 1 ½" 3 way ball valve
- bronze fittings
- 1 ½" thru hull and seacock
- reinforced PVC hoses
- fire hose comes with Lexan nozzle and polypropylene quick disconnect fittings
- Installation
|
| Electrical |
- 20 circuit load center
- Group 8D cranking battery, 2PSC
- Battery box, #4 electrical mains, #2/0 starter cables
- 4 running lights - port, starboard, stern, masthead
- Stainless Steel dome lights – 6 PSC
- 7" searchlight - Jabsco - 200,000 Candlepower
- Pantograph windshield wipers - heavy duty
- Rule 3700 GPH bilge pump, 3-way switch, float, hose
|
| Engine Installation |
- Installation, alignment and bolting
- Solid fiberglass engine beds
- 36' x 1 ½" type “K” keel cooling pipes piped to motor
- Kobelt controls and cables twin
- 4" dry exhaust comes with custom Galvanized muffler, Stainless Steel flex pipe, 304 Stainless Steel schedule 40 pipe
- Galvanized propeller basket
|
| Accommodations |
- Table with benches
- Bottom bunks
- Cupboard and counter top
- Manual marine toilet with brass fittings, thru hulls, including enclosure
- 3-outlet engine heated heater
|
